Length Converter
The Length Converter converts measurements between nine metric and customary units as you type. Check the working and every unit in one table; results show up to 8 significant figures, not split feet and inches.
| Unit | Value |
|---|
What is the Length Converter?
The Length Converter is a free calculator for changing a length or distance between millimetres, centimetres, metres, kilometres, inches, feet, yards, miles and nautical miles. It converts through metres using fixed unit factors, then displays your chosen result, the working and the rate for one source unit. A table also shows your measurement in every supported unit. Students use it to check exercises, shoppers compare product dimensions, and travellers check distances. Metres and meters mean the same unit. Calculations run in your browser, and nothing is uploaded.
Who it is for: This tool is for students, teachers, online shoppers, travellers, DIY users and tradespeople comparing measurements across unit systems.
How to use the Length Converter
- Enter your measurement in the Length number box.
- Choose its current unit in From and the unit you need in To; the tool starts with kilometres to miles.
- Read Result, then check the working, the rate for 1 unit and the table below.
- Tap Swap units to reverse From and To when you need the opposite conversion.
- Tap Copy result to copy the converted value.
Why use it
- See changes as you typeEdit Length or change either unit to update the result without a separate calculate step.
- Check the workingRead the calculation and the rate for one unit to see how the conversion was made.
- Compare all nine unitsUse the results table to view the same measurement in every supported unit.
- Keep measurements on your deviceYour values stay in your browser because the calculation does not upload them.
At a glance
- What you put in
- Numeric length, From unit and To unit
- What you get
- Converted value, working, unit rate and nine-unit table
- Limits
- Up to 8 significant figures; no split feet-and-inches output or US survey foot
- Privacy
- Runs in your browser. Nothing you enter is uploaded or stored.
- Price
- Free for everyone. No subscriptions, no payments, no watermark.
- Works offline
- Yes, once the page has loaded
- Last checked
- by AK Shine
Worked example
Length: 12; From: inches; To: centimetres
30.48
12 inches × 2.54 centimetres per inch = 30.48 centimetres exactly.
When to use something else
- For a result split into feet and inches, use the Height Converter; this tool shows feet as a single decimal value.
- Use a specialist converter for astronomical distances, very small scientific units or legacy US survey-foot measurements, which are not supported here.
- For engineering tolerances or regulated measurements, use the required measurement method and precision; a converted value cannot improve the accuracy of the original measurement.
Questions people ask
How many centimetres are in an inch?
One inch is exactly 2.54 centimetres. Enter your value in Length, choose inches in From and centimetres in To; for the reverse direction, tap Swap units.
How do I convert millimetres to inches?
Choose millimetres in From and inches in To, then enter the measurement in Length. The calculation divides millimetres by 25.4, so 254 millimetres equals exactly 10 inches.
How many feet are in a metre?
One metre is approximately 3.2808399 feet, rounded to 8 significant figures. One foot is exactly 0.3048 metres, so converting metres to feet means dividing by 0.3048.
Can I convert 170 cm to feet and inches?
You can convert 170 centimetres to decimal feet here, but the result is not split into feet and inches. Use the Height Converter for split output; the decimal part of a foot is a fraction of 12 inches, not an inch count.
How many kilometres are in a mile?
One mile is exactly 1.609344 kilometres. Select miles in From and kilometres in To to convert a distance; the tool uses the international mile, which equals 1,609.344 metres.
What is the difference between a mile and a nautical mile?
A mile is exactly 1,609.344 metres, while a nautical mile is exactly 1,852 metres. Both appear separately in From and To, so choose the unit stated in your source rather than treating them as interchangeable.
Why do length converters sometimes show different answers?
Different display rounding or unit definitions can produce different final digits. This tool shows up to 8 significant figures and uses the international foot, not the US survey foot; displayed precision does not make your original measurement more accurate.
Is the Length Converter free, private and available offline?
It is free, with no subscriptions, and calculations run in your browser without uploading your values. Once the tool has been opened and is available offline in the app, you can use it without a connection.