Premium tools, free for everyone. Most run right in your browser.

OpenMultiURL

Links and URLs

How to Open Multiple Websites in Separate Tabs

How to Open Multiple Websites in Separate Tabs title on a coloured card

A pasted list of web addresses creates a simple problem: you want each page in its own tab, not another round of copying and pasting into the address bar. I built Open Multiple URLs for that job, and I test my tools on a budget Android phone and a laptop. But my answer to how to open multiple websites in separate tabs isn't always a bulk opener. I choose a different method for links on a webpage, a spreadsheet list, and websites I visit every day.

Which method should I use to open several websites?

I start with where the links live. If they're already clickable on a webpage, copying them into another tool may add work. If they're sitting in spreadsheet cells, a pasted list makes more sense. And if you need the same pages tomorrow, saving them as bookmarks avoids rebuilding the list.

I use this comparison to choose a method before opening anything.
Where your links areMy preferred methodWhat to watch
Selected links on a webpageOpen each chosen link in a new tabShortcuts depend on your browser and operating system
A pasted list or spreadsheet columnOpen Multiple URLsInput needs checking, and the browser may block tabs
A regular set of saved sitesA bookmark or Favorites folderOld bookmarks still need maintenance
Sites needed at every browser launchBrowser startup settingsTemporary pages can become a repeated distraction
Unfinished pages from the last sessionSession restore, where availableThis restores past work rather than opening a fresh list

Separate tabs keep each page available without replacing the page you're reading. They don't guarantee that every destination loads correctly. I still need to check for sign-in screens, redirects, and broken links after opening them. That's why I judge a method by how easily I can review the results, not just how quickly it creates tabs.

My preference is simple: use the browser's own controls until the list itself becomes the awkward part. Then use a list-based tool. I wouldn't install an extension just to open a one-time list when a browser page can handle the job.

Chrome shortcuts on Windows, Linux, and Mac

In Chrome on Windows or Linux, I hold Ctrl and click a link to open it in a new tab. On a Mac, I use Command-click instead. Google's Manage tabs in Chrome page documents these shortcuts. They're useful when I want to pick individual links while leaving the original page available.

  • For Chrome on Windows or Linux, I use Ctrl-click on each link I want.
  • For Chrome on Mac, I use Command-click on each chosen link.
  • For an empty Chrome tab, I use Ctrl+T on Windows or Linux, or Command+T on Mac. That creates a tab; it doesn't open a whole list.

Firefox and Safari need their own instructions

In Firefox, I can use a link's context menu to choose its new-tab action. Firefox also documents Ctrl+T on Windows or Linux and Command+T on Mac for a blank tab. In Safari on Mac, Command-click opens a link in a new tab by default, but Tabs settings can change the behaviour. I wouldn't apply those Mac instructions to an iPhone or iPad.

If you don't want to remember shortcuts, I suggest right-clicking one link and reading the available choices first. That also makes the difference between a new tab and a new window clear. Keyboard shortcuts involving Ctrl or Command aren't instructions for a phone's touch screen.

How do I open a pasted URL list with Open Multiple URLs?

I use Open Multiple URLs when the addresses are already a list rather than links I want to select on a page. I tried this workflow with Open Multiple URLs: prepare the addresses, paste the list, request the tabs, then check what actually opened. The final check matters as much as the opening action.

  1. Collect the exact pages you need, rather than replacing every address with its website's homepage.
  2. Put one complete web address on each line. For example, https://example.com/ belongs on its own line, without a label before it.
  3. Check the list before pasting it.
    • Remove blank lines and accidental repeated entries.
    • Look for quotation marks, sentence punctuation, or spreadsheet headings copied with the addresses.
    • Set aside unfamiliar or sensitive links for a separate review.
  4. Open Open Multiple URLs and paste the cleaned addresses into its URL input.
  5. Use the opening control to request separate tabs. If only part of the list opens, check the browser's blocked pop-up notice before clicking again.
  6. Review the tabs against your original list. Close unwanted pages and keep track of any address that still needs attention.

I keep the original list until the review is finished. Otherwise, a partly opened batch becomes difficult to untangle: you can't easily tell which addresses were blocked and which opened behind another tab. Reopening the entire list immediately can create duplicates without solving the actual problem.

Tip from me: I start with a small selection from the list. That lets me check the input and browser permission before I ask for the rest.

Keep the addresses, leave the surrounding cells

I copy the address column rather than an entire spreadsheet table. The opening input needs web addresses, not product names, comments, or column headings. Before launching anything, I inspect the pasted text. If each line contains a label instead of a complete address, I go back to the spreadsheet and collect the actual URLs.

I prefer complete addresses such as https://example.com/ because they make the intended destination clearer. I don't assume every opener interprets incomplete addresses in the same way. And I don't remove everything after a question mark just because it looks untidy. Some addresses need those values to reach the intended page.

  • For repeated addresses, I can use URL Deduplicator before opening the list.
  • For questionable formatting, I can use URL Validator as a separate check. A formatting check doesn't prove a destination is safe or available.
  • For links copied from prose, I inspect the beginning and end of each address for surrounding punctuation.
  • For spreadsheet exports, I remove headings and unrelated columns rather than expecting the opener to guess my intent.

I've kept URL Deduplicator and URL Validator separate from the opening step because reviewing input is its own job. You don't need to run every list through both. I would use them when the pasted text gives me a reason to pause, not as extra chores for a clean list.

Can I open saved bookmarks or websites at startup?

Use bookmarks for a routine you choose to start

I prefer a bookmark folder for a repeatable task that doesn't belong in every browsing session. I give the folder a useful name and save the exact pages I need. Then I inspect the folder's menu for its open-all action. Labels and available choices vary, so I don't treat one browser's wording as universal.

Edge has a documented option: right-click the Favorites bar and choose Open all, Open all in new window, or Open all in new InPrivate window. I would choose based on where I want the session to live. I wouldn't assume a private window will already have the account access a destination needs.

In Firefox, Bookmark All Tabs saves the open tabs into a bookmark folder. Mozilla lists Ctrl+Shift+D on Windows or Linux and Command+Shift+D on Mac. I find the distinction useful: saving a set preserves the addresses for later; it isn't the same action as opening that set.

Use startup pages only for a true starting set

For websites you want whenever the browser starts, I would check that browser's startup settings and choose its option for specific pages, where available. Session restore serves a different purpose: bringing back unfinished browsing. I keep temporary research out of my startup list, because yesterday's task shouldn't decide what I open today.

Why does my browser open only the first URL?

I separate browser blocking from input problems before changing anything. If an opener rejects text before any tabs appear, I inspect the list. If a browser notice says pop-ups were blocked, I inspect that permission. If tabs appear but show errors or sign-in pages, I investigate the destinations instead.

I use the visible symptom to decide what to check next.
What you seeWhat I checkMy next step
Only the first tab opens, with a blocked pop-up noticeBrowser permission for the opening pageAllow only that trusted site if appropriate, then retry missing links
The tool reports an input problemThe pasted textCheck complete addresses, line breaks, and copied labels
A tab opens to a sign-in screenDestination account requirementsSign in only if I trust the destination and have access
A tab lands somewhere unexpectedThe original address and final destinationInspect the redirect before continuing
Settings cannot be changedWork or school browser controlsAsk the administrator rather than trying to bypass restrictions

Chrome blocks pop-ups by default. Its documented settings route is Settings, then Privacy and security, then Site Settings. I start with the blocked pop-up notice if one appears, and check which site would receive permission. I want permission for the trusted opening page, not a blanket change for every website.

Tip from me: I don't turn off pop-up protection everywhere to fix a single batch. If I allow a trusted opener, I keep that permission limited to that site and review it later.

How many tabs can I open without slowing things down?

I can't give you a universal safe tab count. The sources here don't establish one, and a lightweight page isn't the same workload as a busy web app. Your device, browser, and destination pages all matter. A number that works on one machine isn't a promise for yours.

Mozilla explicitly notes that opening multiple tabs can affect performance, and Firefox has a setting to warn about it. I treat that warning as useful information, not an obstacle to dismiss automatically. If the browser is already struggling, opening more pages won't help me review the ones waiting.

  1. I begin with a small batch and wait to see whether the pages remain usable.
  2. I review and close completed pages before requesting another batch.
  3. I reduce the next batch if switching tabs or interacting with pages feels slow.
  4. I keep a record of the next unopened address so I don't restart the entire list.

On a phone, I would also consider how much tab switching the task needs. Opening everything isn't useful if finding the right page becomes harder than opening it manually. My goal is a manageable review session, not the largest possible tab collection.

The mistake I most want you to avoid is treating an opened tab as proof of success. A destination can redirect, require authentication, or fail to load. An opener can't bypass account permissions, repair an expired address, or promise that every destination will accept the request.

  • Don't reopen the full batch before checking what already opened. I retry only the missing addresses.
  • Don't confuse a new window with a new tab. I check the browser action and, in Safari on Mac, the relevant Tabs settings.
  • Don't assume a saved bookmark is still current. I update the saved address after confirming the correct destination.
  • Don't keep temporary pages in a permanent startup set. I save them separately if I need them later.

I also avoid changing several browser settings at once. If I edit permissions, rewrite the list, and retry everything together, I lose track of what fixed the problem. Checking one visible symptom at a time is slower than random clicking for a moment, but much clearer when something still fails.

How do I check safety and keep the session manageable?

Before opening unfamiliar links in bulk, I inspect their domains and set aside shortened addresses whose destinations aren't clear. Opening a link isn't a safety check. If a destination asks for account details, I check where I landed before entering anything, even if the original list looked tidy.

I also look for sensitive information in the list itself. Query parameters can contain account-specific values or private links. I won't promise that pasted URLs stay private without clearly documented and verified handling. If you can't establish how a tool treats sensitive input, don't paste that input into it.

For an address I don't understand, URL Parser gives me a separate place to inspect its parts. That isn't a certificate of trust. I still need to decide whether I recognise the destination and whether opening it fits the task.

Once the tabs are open, I work through them in order, close finished pages, and bookmark only what I expect to need again. If the browser supports tab groups, I can separate tasks that way. But I keep the original list until every required destination has been checked, because tidy tabs alone don't tell me whether the work is complete.

Questions people ask

How can I open a list of URLs in Chrome without opening them one by one?

I put one complete address on each line and paste the list into Open Multiple URLs. Then I request the tabs and check Chrome for a blocked pop-up notice. If permission is needed, I allow only the trusted opening site rather than disabling protection everywhere.

Can I open all the bookmarks in a folder at once?

I use bookmark folders for sets I want to reopen. The exact open-all command depends on the browser, so I inspect the folder's menu rather than assume a label. In Edge, Microsoft documents Open all options from the Favorites bar. I also remove outdated entries before reopening a saved set.

How do I open multiple websites at once in Firefox?

For a pasted list, I use Open Multiple URLs and check whether Firefox permits the requested tabs. For links on a page, I use the link context menu's new-tab action. To save an existing set, Firefox offers Bookmark All Tabs, which stores the open pages in a bookmark folder.

How do I open multiple websites at once in Microsoft Edge?

If the sites are saved on the Favorites bar, I right-click the bar and choose Open all, or its new-window option if I want a separate window. For addresses copied from a document or spreadsheet, I use a cleaned list in Open Multiple URLs instead, then review the destinations.

How do I open several websites in separate tabs on a Mac?

For selected links in Chrome on Mac, I use Command-click. Safari on Mac also uses Command-click by default, although its Tabs settings can change behaviour. For a pasted list, I use Open Multiple URLs and check browser permissions. I don't assume Safari instructions for Mac apply to an iPhone or iPad.

Can I open multiple URLs at once without installing an extension?

Yes. I can use Open Multiple URLs for a pasted list without installing an extension. Browser shortcuts and saved bookmark sets are built-in alternatives for other situations. I choose based on where the links already are, and I still check permissions, address quality, and the pages that actually open.

What to do next

I would start by choosing the method that matches your links. Use your browser's new-tab action for selected webpage links, save a bookmark folder for a repeatable set, and use Open Multiple URLs for a pasted list. Put one complete address on each line, remove obvious mistakes, and try a small batch first. If tabs are blocked, check permission for the trusted opening page instead of weakening protection everywhere. Then review the destinations, close finished tabs, and keep your original list until you've checked every page you needed.

Sources I checked

Tools from this guide

Keep reading