Premium tools, free for everyone. Most run right in your browser.

OpenMultiURL

Links and URLs

The Best Way to Open Multiple Links at Once, by Task

The post title on a coloured card about opening multiple links in browser tabs

A pasted list of web addresses creates a small but annoying job: opening each page without losing your place. When I explain how to open multiple links at once, I start with where those links are. A clean list needs a different approach from links scattered across a webpage. I built Open Multiple URLs and tried the steps below on my budget Android phone and laptop. My advice is simple: prepare the list, open a small batch, and check what your browser actually allowed.

For a list you can copy and paste, I recommend Open Multiple URLs. It fits the task directly: you bring the addresses, then request that they open in separate tabs. I wouldn't build a bookmark folder for a changing research list, and I wouldn't install an extension just to open a prepared list occasionally.

I choose the method before opening anything

I use the starting point, rather than the number of links alone, to choose a method.
Where your links areMy first choiceWhat I check
A pasted list of web addressesOpen Multiple URLsFormatting, duplicates and pop-up permission
The same saved sites each dayA bookmark folderThe browser's folder open-all option
Links scattered across a webpageCollect addresses or review a link-selection extensionWhich links are selected and extension permissions
A spreadsheetCopy the actual destination URLs into a listWhether cells contain addresses or just labels
A few visible linksOpen them individuallyWhether bulk opening would add needless setup

The distinction matters because a bulk URL opener isn't automatically a webpage link collector. Pasting an article title doesn't give it the hidden destination behind that title. And opening a list isn't the same as checking every destination. I treat collection, opening and review as separate jobs, even when they happen close together.

How do I prepare a list of URLs before opening it?

I start with one complete web address per line. That keeps the list readable and avoids depending on how a particular tool handles commas, spaces or copied prose. A domain alone identifies a site, while a full address can point to a specific page. If you need an article, keeping only its domain loses the part you wanted.

I preserve the parts that identify the page

  • I check each line for a complete HTTP or HTTPS address.
    • I remove copied list numbers or surrounding quotation marks.
    • I check that a long address hasn't been split across lines.
  • I review repeated entries before opening them.
    • I remove exact repeats when I only need one visit.
    • I keep different query strings when those differences are part of my test.
  • I separate unfamiliar links from the addresses I already trust.

For repeated addresses, I use URL Deduplicator before opening the list. For a confusing address, I turn to URL Parser to inspect its parts. I don't strip everything after a question mark by habit. A query string can identify content or hold campaign details, so removing it can change what you're trying to review.

Tip from me: I keep an untouched copy of the original list. If cleanup changes the wrong address, I can compare it with the source instead of trying to reconstruct it.

How do I open a list with Open Multiple URLs?

My workflow starts with a reviewed list, not a promise that every browser will open every tab. Browser permissions still apply. I keep the original list nearby so I can tell which addresses remain if an opening attempt is partly blocked. That is more useful than pressing the opening control repeatedly and creating duplicate tabs.

  1. I open Open Multiple URLs and copy a small portion of my prepared list.
  2. I paste the addresses into the URL input area, keeping one address per line.
  3. I review the pasted text for unwanted entries, broken lines and repeated addresses.
  4. I use the tool's opening control, then check which tabs the browser allowed.
  5. If tabs are blocked, I inspect the browser's pop-up notice and consider a site-specific exception.
  6. I review the opened pages, record anything that failed, and continue with the next portion.

I check the result, not just the tab strip

A new tab can contain an error, a login form or a redirected page. I compare the destination with the address I intended to visit. For research, I keep the useful pages and close the rest. For a link check, I note the failure separately. Opening the tab completes the opening step, not the whole review.

If only one link opens, my first check is the browser's pop-up protection. Chrome blocks pop-ups by default. A click doesn't give a webpage unlimited permission to create new tabs. As MDN explains for window.open(), scripted openings generally need user interaction, with a separate gesture required for each call. A blocked opening can return no usable window.

I look for a site-specific control, with labels that can vary by browser version and device.
BrowserWhere I lookWhat I change
ChromeBlocked-pop-up indicator in the address barAllow pop-ups for the trusted opener site
FirefoxPop-up settings and site exceptionsAdd a site-specific exception if appropriate
Safari on MacThe website's pop-up settingChoose Allow instead of Block or Block and Notify
Microsoft EdgePop-up settings for a specific URLAllow the trusted opener's address

In Chrome, I select the blocked-pop-up indicator after an attempt, check that it refers to the opener site, and choose its site-specific allow option. I then retry only the addresses that didn't open. Google's Chrome pop-up instructions are the reference I use if the controls look different.

Tip from me: I don't disable pop-up blocking for every website. After the task, I can return to the site's pop-up permission and remove the exception. On a work or school device, an administrator may control that setting.

From Excel, I need destinations rather than labels

A spreadsheet cell can show a full address or a friendly label such as Product page. I check what actually reaches the clipboard before pasting a whole column. If the pasted text contains labels rather than destinations, I stop there. A bulk opener can't infer the intended address from a label. I first obtain the actual hyperlink targets using a method suitable for that spreadsheet.

When the cells already contain plain web addresses, I copy the relevant column, paste it into a plain list, and inspect the line breaks. I leave out the column heading, empty rows and notes. Then I use the same Open Multiple URLs workflow. I don't assume every spreadsheet version handles copying linked cells in the same way.

On a webpage, I decide which links belong in the task

I rarely want literally every link on a page. Menus, footer links and repeated navigation can swamp the useful results. For a short selection, I collect the addresses manually. For repeated selection work, I might consider an extension designed to select links, but I review its permissions first. I wouldn't assume Open Multiple URLs can collect hidden destinations just because I pasted the surrounding page text.

How many tabs can I open without slowing my device?

I don't give you a universal safe tab count because the sources don't establish one. The device, browser and pages all matter. Firefox even offers a warning about opening multiple tabs when doing so might slow the browser. A count that feels comfortable for one task can be a poor choice for a different set of pages.

  • I begin with a small portion of the list and watch whether the browser stays responsive.
  • I review and close pages before requesting more if switching tabs starts to feel slow.
  • I keep separate lists for separate tasks so unfinished pages don't get mixed together.
  • I save my place in the original list rather than keeping every reviewed page open.

On a phone, I use the same cautious approach, but I don't expect desktop controls or identical tab-opening behavior. If the mobile browser blocks the batch or gives me no suitable site-specific control, I open the remaining links individually or move the task to my laptop. Repeatedly tapping the opening control doesn't fix a permission rule.

My stopping point is practical: can I still switch pages, read them and keep track of what remains? Bulk opening should reduce repetitive work. If managing the tabs becomes the main task, I reduce the batch.

I separate two questions: what happens to the pasted list, and what happens when the destinations load. A provider's statement that processing stays in your browser isn't the same as an independent privacy check. And even if list processing is local, opening the destinations still sends visits to those websites. A link opener doesn't make the destinations anonymous or trustworthy.

  • I inspect unfamiliar domains, especially links from unexpected messages.
  • I hold back shortened links until I understand where they lead.
  • I avoid casually pasting private dashboard addresses or links containing sensitive access details into an unfamiliar service.
  • I review an extension's requested permissions and privacy information before installing it.

I distinguish opening tabs from reading existing tabs

Chrome extensions can create tabs through the Tabs API. Creating a tab doesn't itself require the tabs permission, which concerns sensitive properties such as existing tabs' URLs, titles and favicons. So I don't treat broad access as an automatic requirement for a basic opener. I ask what the extension needs to do, then compare that with the access it requests.

What mistakes should I avoid when opening multiple URLs?

The mistake I most want you to avoid is treating every failure as the same problem. No new tab suggests an opening or permission issue. A new tab showing an error suggests a destination issue. A login page means access is still required. I identify the stage that failed before changing settings or retrying the whole list.

  1. Don't retry the entire list blindly. I check which tabs opened first, then retry only what remains.
  2. Don't treat all address schemes as webpages. I separate mailto:, tel: and file links from HTTP and HTTPS addresses.
  3. Don't remove useful URL parts during cleanup. I preserve paths, queries and fragments unless I know why I'm changing them.
  4. Don't mistake a redirect for the expected page. I check the final destination when it matters to the task.
  5. Don't expect bulk opening to bypass logins, paywalls or other access controls. I use the access the destination requires.

When an address fails, I compare it with the original before blaming the opener. Copied punctuation or a broken line can change the address. I use URL Validator as a separate format check, without treating valid format as proof that a page is live. For a changed destination, I use Redirect Checker as part of the investigation.

How do I open the same group of websites every day?

For an unchanged daily set, I prefer a bookmark folder over repeated copying and pasting. I save only the pages that belong to that routine, then look for the browser's option to open the folder's bookmarks together. The wording and availability can vary. I treat the Chrome Community bookmark-folder suggestion as a useful workflow tip, not a guarantee about every current browser menu.

For a changing set, I keep using a plain URL list. It is easier for me to review what changed before opening anything. I separate recurring dashboards from temporary references so a one-off research page doesn't quietly become part of the daily routine. The opening method should follow how stable the list is, rather than becoming a habit I never question.

My final step is to leave a clear starting point for next time. I keep the saved set current, remove pages I no longer need, and preserve notes about addresses that failed. That is the part bulk opening can't do for me. The tool removes repeated opening actions; I still decide what deserves attention.

Questions people ask

How can I open a list of URLs in separate tabs?

I put one complete HTTP or HTTPS address on each line, review the list, and paste it into Open Multiple URLs. Then I use the opening control and check the result. If the browser blocks some tabs, I inspect its pop-up notice before retrying only the addresses that remain.

Why does only one link open when I use a bulk URL opener?

I check pop-up protection first because browsers restrict scripted tab opening, even after a click. In Chrome, I look for the blocked-pop-up indicator in the address bar. If I trust the opener, I allow that specific site rather than disabling protection globally. Browser policies can still affect the result.

Can I open multiple links from an Excel spreadsheet at once?

I can use the same pasted-list workflow when the spreadsheet gives me actual web addresses. I copy the relevant cells and inspect what was pasted. If I only get display labels, I need to obtain the hyperlink destinations first. I don't assume copying a linked label always copies its address.

How do I open all the links in a webpage at once?

I first decide whether I really need every link, including navigation and footer links. For selected links, I collect their addresses or consider an extension built for link selection. I review the extension's permissions before installing it. Pasting visible webpage text into a URL opener doesn't necessarily preserve hidden destinations.

Can I open multiple links on my phone?

I try a small prepared list first and check what the mobile browser permits. I don't assume it has the same pop-up controls as its desktop version. If the browser blocks the task without a suitable site-specific option, I open links individually or move the larger batch to my laptop.

How many tabs can I open at once without slowing down my computer?

I don't use a fixed safe number because device performance, browser behavior and page content vary. I start small and watch how the browser responds. If switching or reviewing pages becomes slow, I close finished tabs and reduce the next batch. The useful limit is what your device and task can handle.

What to do next

I would start by copying the actual web addresses into a plain list, keeping one address per line. Remove unwanted entries, keep an original copy, and open Open Multiple URLs. Paste a small portion first and check which tabs appear. If the browser blocks them, consider a site-specific pop-up exception only if you trust the opener. Then review the destinations before continuing. For a stable daily set, use a bookmark folder instead. My goal isn't to fill your tab bar. It's to help you reach the right pages with less repeated clicking and a clear place to resume.

Sources I checked

Tools from this guide

Keep reading